Electronic Multistage INOX Water Pressure System with Brio 2000-M 900W – 1.25Hp 5CRm 100 Pedrollo

A fully automatic pressure system featuring a multistage stainless steel pump and an electronic pump controller. Ideal for supplying water in homes without access to municipal networks or in areas where water pressure is insufficient. Suitable for irrigation, garden watering, small industrial installations, and any other application requiring water pressure boosting.

The electronic water controller is a device installed on the pump (single-phase or three-phase), in any position (vertical or horizontal) according to flow direction. It automates the pump’s operation—starting it when pressure drops (e.g., when a tap is opened) and stopping it when flow ceases (e.g., tap is closed). Compatible with pumps from 0.5Hp to 2Hp.

The operation is governed by the Brio 2000-M controller. The pump starts when pressure falls below the set lower limit and stops when it rises to the upper limit. The motor features a copper winding, compact and user-friendly design.

Multistage pumps deliver high flow and head with low power consumption. They are reliable, quiet, and practical. With a suction lift up to 8 meters, they are perfect for garden irrigation and boosting pressure. Recommended for clean water applications only.

The 5CRm 100 pump features:

• 5 stainless steel impellers

• INOX (AISI 304) stainless steel body and shaft

• Ideal for clean water or similar liquids with neutral chemical properties

• Suitable for use with wells, garden irrigation, pressure boosting, water distribution, etc.

• Not suitable for water containing solids or corrosive substances

Installation should be in well-ventilated locations, protected from extreme weather conditions.

Dry-Running Protection:

Automatically stops the pump when it detects a lack of water (e.g., empty well or tank), preventing damage.

Brio 2000-M Controller Advantages:

• Automatic restart after dry-run protection (by pressing a button)

• Overpressure protection: stops the pump at a preset upper pressure limit

• Moisture-resistant electronic board housed in a sealed enclosure

Technical Specifications:

• Model: 5CRm 100

• Pump type: Multistage

• Power: 1.25 HP / 900W

• Inlet/Outlet: 1" x 1"

• Pump body: Stainless steel AISI 304

• Impellers: Stainless steel

• Shaft: Stainless steel AISI 304

• Number of impellers: 5

• Noise level: Low

• Motor winding: Full copper

• Thermal protection: Built-in (for single-phase motors)

• Insulation class: F

• Protection class: IPX4

• Voltage: 220V / 50Hz

• Max flow rate: 7800 L/h

• Max head: 63m

• Max suction depth: 7m

• Max pressure: 6.3 bar

• Min liquid temperature: -10°C

• Max liquid temperature: 40°C

• Max ambient temperature: 40°C

• Product code: 108394

Includes:

 

• Single-phase Multistage Stainless Steel Pump Pedrollo 5CRm 100 1.25Hp – Click on the image to view more specifications

 

• Electronic Pump Control Device Brio 2000-M – Click on the image to view more specifications.

Advantage of the New Motor:

• Pedrollo and its engineers are constantly working to improve motor efficiency by using the same or even less energy.

• The 5CRm 100 model has been upgraded — its new motor is now manufactured at 1.25Hp, while maintaining the same pump performance in terms of maximum head and flow rate (previously with a 1.5Hp motor).

•  Through this optimization, Pedrollo aims to reduce energy consumption as well as environmental emissions.
  

Enjoy the performance and quality of your new and improved Pedrollo pump.

It is recommended to use an expansion tank in combination with the electronic controller for the following reasons:

• To prevent frequent starts of the pump

• To stabilize flow and avoid pressure fluctuations in the system

• To protect the hydraulic components of the pump and the installation from water hammer

• To prevent air entrapment in the system

• To reduce electricity consumption

To view potable water expansion tanks, click on the image below: