Replacement Activated Carbon Filter CB-AF CYST 10 SX 1μm MADE IN USA 320841 Atlas Filtri 10"

Carbon is a fine, odorless, tasteless, and non-toxic black substance in powder form and is an entirely natural product. It is typically produced from coconut shells, wood, sawdust, bamboo, peat, as well as other natural sources (the carbon filters you see here are produced from coconut shells).

Activated carbon is similar to regular carbon but is heated in a controlled environment and in a vacuum. This process gives it an extremely porous surface. These microscopic holes increase the surface area of the carbon, allowing it to bind various substances that come into contact with it—in both gaseous and liquid forms—in quantities multiple times its own weight. One cubic centimeter of activated carbon has the same surface area as 50,000 square meters.

Activated carbon water filters are divided into granular (powder form) and compact form (carbon block). The permeability of the carbon block (how "tight" it is) is measured in microns (μm). The fewer microns a filter has, the "tighter" the filtration it provides.

Compact Activated Carbon:

• Compact activated carbon filters (extruded) are manufactured from activated carbon powder which, under specific processes, creates filters with a single solid mass.
• The advantage of filters in this category is that they behave as a single body, preventing the escape of activated carbon granules into the water, which occurs with Granular Activated Carbon (GAC) filters.
• Furthermore, their manufacturing technology can produce very dense filters capable of trapping particles as small as 1 μm.

Activated Carbon Function:

• Activated carbon in fiber form and nanometer size (nm) is compressed under specific conditions, creating a very dense mesh with much higher water permeability.
• This results in the retention of very small particles while minimally reducing water flow and pressure.

*The Filter is certified and complies with NSF/ANSI Standard 42

The Atlas Filtri CB AF CYST 10 SX 1μm Coconut Shell Activated Carbon water filter is made from solid CARBON block, providing high levels of retention for sediments (dirt and suspended particles), pesticides, unpleasant taste and odor, organic chemicals, industrial residues, toxins, and chlorine. The nanofiber manufacturing technology creates very dense filters that trap particles up to 1 μm while minimally reducing water flow and pressure.

Made from coconut shell, it ensures the removal of chlorine and unpleasant taste and odor. It is also ideal for Reverse Osmosis systems because its compact structure prevents the escape of carbon particles, thereby increasing the lifespan of the membrane.

Removes:

• Removal of sediments (sand, silt, rust, and suspended solids) down to 1μm

• Chlorine removal up to 100%

• Removes chloroform, pesticides, and organic chemicals

• Removes industrial residues, toxins, and other harmful substances that contaminate water

• Removes suspended particles, sand, rust, silt, soil, and various other harmful substances

• Removes organic chemicals

• Removes toxins

• Removes harmful microorganisms (Cysts, Cryptosporidium, Giardia, Toxoplasma)

• Removes microbes

• Significantly improves the taste and smell of water

• Water is filtered through pores of 1 millionth of a meter (micron)

• Filters all particles larger than 1 micron (for comparison, a human hair is 75 microns in diameter)

• Removal of organic substances

• High-level improvement of water taste and odor

• Does not remove essential minerals and trace elements

Technical Specifications:

• Permeability: 1 μm

• Water Flow: 230 Lt/h (3.83 Lt/min) 

• Filter Lifespan (Replacement):3 - 6 months

• Material: Coconut shell activated carbon

• 100% Coconut shell carbon

• Does not release carbon dust

• Certified by the NSF

• Minimum Operating Temperature: +4°C

• Maximum Operating Temperature: +45°C

• Height: 10’’ (25.4 cm)

• Diameter: 2.50’’ (7 cm)

• Non-toxic material, suitable for drinking water

• Does not remove essential minerals and trace elements

• Filter is manufactured from high-quality vegetable carbon

• Must be replaced every 12 months at the latest

• Fits any standard commercial 10" housing

• Can be installed in both countertop and under-sink water filters

• Recommended for use in water coolers, Reverse Osmosis systems, etc.

• Atlas Filtri is the world's leading manufacturer of all types of water filters

• Manufactured in USA by Atlas Filtri

• Characterized by high quality of materials and construction

• Save on the cost and burden of carrying bottled water

• Enjoy the water from your home

• Drink clean and healthy water, cook, wash fruits and vegetables, and make coffee and tea with odorless and tasty water

See below the 10" countertop, under-sink, and Reverse Osmosis systems that fit this replacement filter:

• To see the 10" countertop filter housings that fit the CB AF CYST 10 SX 1μm Atlas Filtri replacement filter, click on the photo.

• To see the 10" under-sink filter housings that fit the CB AF CYST 10 SX 1μm Atlas Filtri replacement filter, click on the photo.

• To see the 10" under-sink Reverse Osmosis systems that fit the CB AF CYST 10 SX 1μm Atlas Filtri replacement filter (used in the 3rd stage), click on the photo.